Thursday, October 18, 2012

I'm on

I while back I made a cable to connect a JTAG test system to a proprietary DSP board. The cable has a Molex type connector in one end and a RJ45 in the other (not Ethernet), but the Molex side looked vulnerable with bare cables soldered to pins.

So I took some Sugru I had lying around and covered it up. I posted the result on their site, and today I discovered that my contribution is featured on the front page. If you look at the picture you can see my design in the lower left hand corner, see Make a 14-pin, 2 row connector.

Sugur is really a fantastic material, and I look forward to finding more uses for it.

No comments:

Post a Comment